[You must be registered and logged in to see this link.] unlock user lock code by infinity HERE IS D LOG FOR SANSUI V929 SUCCESSFULLY UNLOCK USER LOCK CODE WHICH IS NOT YET SUPPORTED BY INFINITY: COM1 [Serial0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection activated
unlock method: standard
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
chip: 0031:9402:89AF
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
detecting chip #01 in region #00...
flash: 98004900000002:29EA0000000000
flash: Toshiba AMD/Fujitsu std [T 0008x002000 00FFx010000] 16Mb
it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #0...
detect device identification finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
security area backup saved: id.6703DD4F.[M678_PCB01_GPRS_MT6226_S01.SANSUI929AV01_01B01.BIN _54981B6D].rpl
New firmware detected:
M678_PCB01_GPRS_MT6226_S01.SANSUI929AV01_01B01.BIN
- make "Repair security (ex. ask/rpl)" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 6703DD4F
protocol ver: 04
ver. sw1: M678_PCB01_GPRS_MT6226_S01.SANSUI929AV01_01B01.BIN
ver. sw2: sansui929Av01.01b01
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 98004900000002:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
detecting structure pass 1...
................
detect standard fat location pass #1...
.................................................. ......
detect extended fat location pass #1...
................................................
detect standard fat offset pass #1...
detect standard fat data...
fat layout detection complete
eeprom element #1 detected ok
reading [eeprom[M678_PCB01_GPRS_MT6226_S01.SANSUI929AV01_01B01.BIN]]...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_eeprom[M678_PCB01_GPRS_MT6226_S01.S
ANSUI929AV01_01B01.BIN]_20071119-182849.B0E.bin
flash: 98004900000002:29EA0000000000
Identification Done
Manipulation...
detection procedure, wait...
detection procedure completed
Manipulation Done
Finalization...
Finalization Done
Write...
flash: 98004900000002:29EA0000000000
Write: eeprom
Write Done
file saved: backup_system_log_6703DD4F_M678_PCB01_GPRS_MT6226_ S01.SANSUI929AV01_01B01.BIN_54981B6D_20071119-183159.B0X.bin
Finished, time used: 436 sec
Remove/Install battery now !
HERE R D PINOUTS:CONECTOR TYPE 1X18 1,2 GROUND 3.PHONE RX 4.PHONE TX
Subject: sansui v929 successfully unlock user lock code by infinity 
11/19/2007, 11:20 am
